Pressure container with card holder
Features
Case study with a mold manufacturer
A custom-made example of a stainless steel pressure vessel in which inert gas is injected to purge the internal air for storage.
This pressure vessel has a card holder attached to the side.
The bottom of the holder has a drainage gap to prevent the accumulation of cleaning liquid.
Customer's request
"I need an easy-to-use identification label," and " image like a container with a card holder."
Engineer's comment
Standard specification card holders could not be attached to a container of this size, so a custom-made card holder was manufactured and attached to match the container.
Sales comment
After delivery, we received an order for four more units. It seems that the specifications were exactly as we had imagined.
Product Specifications
| Material | SUS304 |
|---|---|
| container dimensions | Inner diameter φ158.4mm x height about 230mm |
| Card holder dimension | 82mm x 60mm |
| capacity | 3L |
| Use pressure (room temperature) | 0.4MPa |
| Surface treatment | Inner and outer buff polishing |
| Management number | 1Y004896 |
