Pressure Feed

Lift lifter integrated pressure tank

​Features

Pharmaceutical manufacturer delivery
○ It is a custom-made case of stainless steel pressure vessel used in the manufacture of drug substance in combination with customer owned filtration equipment.

Since the process for which high health grade is required, we ordered from the existing resin tank to the stainless steel tank.
Pressure the contents of the tank and filter it and fill it into another receiving tank.
The stainless steel tank can reduce the risk of contamination as compared to the fluffy resin tank with aging.
The lid is a spring with a spring and easy to open and close.
The inner surface of the container is electropolished.
By raising the lifter and producing a height difference with the receiving tank, you can reduce the time it takes to fill.
Lifter The stainless steel top plate is attached to the rusty stainless steel so that it can be washed with each other.

​Product Specifications

Dimension container inner diameter O 345 mm × Container high H898mm
Lifter: 1205mm × 550mm × H1521mm
About 39 l capacity
Container material SUS316L
Surface treatment and exterior surface buff after polishing, internal electrolytic polishing
Usage pressure 0 to 0.3 MPa (normal temperature)
Other O-Ring (EPDM)
YK Balancer (Sealed Waterproof Type)

Management number 1U005047 FB # 23

Details & Notes

There is a “flange open pressurized container leg” as a product that is based on this order-made case.

We can order not only stainless steel container single items, but also set up with the specifications combined with existing equipment, and set of additional devices such as lifters. ?View Product DetailsView Product DetailsCustom-made case considering the ease of movement of stainless steel containerView Product DetailsView Product DetailsView Product DetailsIf you are concerned about the case of other companies in the same industry

We adopt a stainless steel container of the Nitto Metal Industries in various industry manufacturers.

We have published some of the custom-made cases so far by industry.

Search for examples of adoption by industry

Contact Us

It is our job, of course, to conduct in-depth meetings with our sales and manufacturing staff and to design and draft products.

Eighty percent of made-to-order products are completely made-to-order items, and drawing drawings for these custom-made products have a track record of 80,000 sheets so far.

There are many difficult requests, and they have been created through trial and error. They are all accumulated as our knowledge.