QR-100M: Suction Filtration Containers

​Features

It is a container that quickly filter the interior of the container to a reduced pressure state.

○ The inside is reduced by absorbing the air in the container from the suction port of the lid.
○ Switch the liquid with the catch net between the hopper and the container at the top of the container.
○ The container body is made of rust -resistant stainless steel. In addition, it is better than a glass filter.
○ The opening rate of hopper and catch net (net) can be changed depending on your request.
○ There is a "container" in the container, and the filtered liquid accumulates here. Since the content vessel is relatively lightweight (about 1/2 to 1/3 of the outside container), workers can easily take out the liquid.
○ If you remove the hopper, close the helped part, and reduce the pressure, you can use it for simple vacuum shining foam.
○ In addition to the container body (outside container / container), a vacuum meter is included.

View Optional Machining

Click here to purchase

Download Data

Drawings Not Available

Certificate Not Available

Available Drawings

If you register as a member, you can download the drawing data of our products.
Please kindly note that a part of CAD drawing data is not open to the public.
*Drawings including but not limited to "Accessories", "Agitator"are not available.

Sign Up

Product Introduction Video

​Product Specifications

Container body (internal / external / input hopper): SUS304
Hopper connection part: 2s Helle
Catch net: SUS304
Packing: Silicon rubber (Food Sanitation Law Compatible)
● Surface treatment: Inner and outer buff polishing
● Usage conditions: Decompression specification (-0.1MPa)

Capacity: 18L, 25L, 30L
Catch net: 100 mesh
Please contact us for other capacity and net (filter) size.

[True vacuum specification]
Load range: -0.1 ~ 0MPa
Size: 60mm
Material: Suspo SUS

Reference ​Dimensional Drawing

Details & Notes

ModelCapacity (inside)Hopper diameterInner diameter (outside)Inner diameter (inside)Total heightContainer height (outside)In -container height (inside)Mass (overall)Mass (outside)Mass (inside)
LφD1φD2φD3H1H2H3kgkgkg
QR-100M-3618300360300698415300116.32.3
QR-100M-39twenty five330387330766455330147.42.8
QR-100M-4330360430360826490360178.93.8

Cover the solution quickly

By vacuuming the inside of the container, the solution etc. in the hopper is sucked and filtered quickly.

The feature is that it can be used overwhelmingly because it sucks instead of its own weight.

Since this product is made of all stainless steel, unlike the glass filter, there is no worry about cracking of containers, injured accidents, and foreign matter mixed.

The filtered liquid goes to the container

The filtered liquid is discharged to the container, not the outside container.

There is a content vessel in the outside container that can be easily opened by the catch clip. In addition to the hanging type handle on the content vessel, it is easy to remove liquid because it weighs about 1/2 to 1/3 compared to the outside container. Reduce the burden on the worker.

Filter opening rate can be changed according to the solution

The usually attached catchnet (filter) is 100 mesh. In addition, we can also propose net and punching metals with different sizes. If you change only the filter, you can filtrate multiple solutions.

In addition, if you prepare multiple content vessels, you can filter continuously, or change the angle of the hopper in response to the solution to improve the introduction efficiency.

How to use it as a simple vacuum flutter

If you remove the input hopper and filter, close the helping portion and reduce the pressure, you can make a simple vacuum foam.

It is also possible to attach a cap helnel after filtration and bubble it as it is.

Q&A

Can I change the angle and size of the introduction hopper?
We will respond by custom -made. Please tell your sales representative to your sales representative.
Can I buy peripherals such as pumps together?
We will select according to your wishes. Please contact us for more information.
What is a cap helnel?
It is a lid that can be attached to the helped part. Please check this out for details.
Can I choose a catch filter other than 100 mesh?
Other eyes and punching metal can be available.
Is it possible to pressurize?
It does not support pressure. Please use the [PCN] series for pressure.

Contact Us

It is our job, of course, to conduct in-depth meetings with our sales and manufacturing staff and to design and draft products.

Eighty percent of made-to-order products are completely made-to-order items, and drawing drawings for these custom-made products have a track record of 80,000 sheets so far.

There are many difficult requests, and they have been created through trial and error. They are all accumulated as our knowledge.