NTMA-A-SD: Aluminum Air motor vertical stirrer (BEAGR E type BEAGR E)

​Features

A stirrer excellent in stirring with a foaming suppressed.
Stirring of about 30 to 150L is possible.

○ Adopts a stirring body that is excellent for stirring that does not involve air.
○ Use an aluminum air motor that can be stirred at a maximum of 1050 rpm (in the case of viscosity water).
○ Can be used in the explosion -proof area.
○ It can be used without refueling and does not have to worry about oil scattering.
○ It is a vertical type that connects a helping to the lid of the container.
○ Since the connection between the container and the stirrer can be sealed, it will prevent foreign intersection from outside.

Click here to purchase

Download Data

Drawings Not Available

Certificate Not Available

Available Drawings

If you register as a member, you can download the drawing data of our products.
Please kindly note that a part of CAD drawing data is not open to the public.
*Drawings including but not limited to "Accessories", "Agitator"are not available.

Sign Up

​Product Specifications

Material (shaft) ... SUS316
Material (stirring body) ... SUS316L
Connection Helle size ... 4.5s

Reference ​Dimensional Drawing

Details & Notes

ModelMaximum number of rotations (at maximum output)Shaft diameterWeight (excluding shaft)Standard stirring bodyRated torqueSupply pressureAir consumption
RPMφkgN / MMpaL/min
NTMA-A-SD-E991050206.6BEAG®E type φ990.880.5250
Atmospheric Pressure Type
Portable type…Clamp connection to the pedestal for installation of the agitator. It is inserted into the notch in the lid.
Vertical Type…Connects to the container lid ferrule. The connection can be sealed to prevent foreign matter from entering.
Endurance pressure specification (~0.18 MPa)

Stainless steel electric motor type agitator

Aluminum Electric Motor Type Agitator

Aluminum Air Motor Type Agitator

Q&A

Can I buy it with a stirrer alone?
Is possible. We will make it according to the application.
Can I change the size of the stirring body?
It can be changed depending on the capacity and viscosity.
Is it possible to install the stirring in two steps or change it to another shape such as a paddle type?
This motor cannot be done. Please contact us for details as other motors are possible.
What is the difference between [NTMA-A] and [NTMA-S] for the helped connection?
[NTMA-A] [NTMA-S] is a stirrer with pressure-resistant (~ 0.18MPa). In addition, it comes with garbage receiving that collects wear powder generated from the shaft seal. On the other hand, this product is a normal pressure specification and cannot be pressed. In addition, garbage receiving is not included.

Contact Us

It is our job, of course, to conduct in-depth meetings with our sales and manufacturing staff and to design and draft products.

Eighty percent of made-to-order products are completely made-to-order items, and drawing drawings for these custom-made products have a track record of 80,000 sheets so far.

There are many difficult requests, and they have been created through trial and error. They are all accumulated as our knowledge.